Festo 8083719 mini slide unit

EGSS-BS-KF-60-125-12P-ST-M-H1-PLK-AA

$1,714.16 Limited stock only available on quotation

Specifications

Series (EGSS) Electric slide drive
Drive system (BS) Ball screw drive
Guide (KF) Recirculating ball bearing guide
Size (60) 60
Stroke [mm] (125) 125
Spindle pitch (12P) 12 mm
Motor type (ST) Stepper motor ST
Controller (M) Integrated
Control panel (H1) Integrated
Bus protocol/activation (PLK) PNP and IO-Link®
End-position sensing (AA) With integrated end-position sensing
Cable outlet direction Standard
Motor attachment position Standard
Electrical accessories None
Nominal current 5,3 A
Logic interface, number of pins/wires 8
Type of mounting Via female thread Via centring sleeve With accessories Via cylindrical pin
Material guide slide Rolled steel
Material housing Anodised wrought aluminium alloy
Material piston rod High-alloy stainless steel
Material spindle nut Rolled steel
Working stroke 125 mm
Stroke reserve 0 mm
Spindle diameter 12 mm
Mounting position optional
Design Electric mini slide With ball screw drive With integrated drive
Referencing Positive fixed stop block Negative fixed stop block Reference switch
Symbol 00997294
Rotor position sensor Absolute single-turn encoder
Additional functions User interface Integrated end-position sensing
Ready status indication LED
Max. speed 0,24 m/s
Features of digital logic outputs Configurable Not galvanically isolated
Insulation protection class B
Max. current consumption 5.300 mA
Parameterisation interface IO-Link User interface
Permissible voltage fluctuations +/- 15%
power supply, connection system M12x1, T-coded according to EN 61076-2-111
Power supply, connection pattern 00995989
KC mark KC-EMV
CE marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions
Shock resistance Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27
LABS (PWIS) conformity VDMA24364 zone III
Relative air humidity 0 - 90%
Protection class III
Note on ambient temperature Power must be reduced by 2% per K at ambient temperatures above 30°C.
Dynamic basic load rating linear guide 13.400 N
Max. force Fy 4.937 N
Max. moment Mx 20 Nm
Max. moment Mz 30 Nm
Max. feed force Fx 250 N
Reference value effective load, vertical 10 kg
Static basic load rating linear guide 26.900 N
Static basic load rating fixed bearing 7.000 N
Maintenance interval Life-time lubrication
Additional moving mass per 10 mm stroke 40 g
Basic weight for 0 mm stroke 2.735 g
Number of digital logic outputs 24 V DC 2
Specification logic input Based on IEC 61131-2, type 1
IO-Link, SIO-Mode support Yes
IO-Link, Protocol version Device V 1.1
IO-Link, Port class A
IO-Link, Process data length OUT 2 bytes
IO-Link, Process data length IN 2 bytes
IO-Link, Service data IN 32-bit force 32-bit position 32-bit speed
IO-Link, Data storage required 500 Byte
Switching logic for outputs PNP (positive switching)
IO-Link, connection technology Plugs
Logic interface, connection technology M12x1, A-coded according to EN 61076-2-101
Logic interface, plug pattern 00992264
Note on materials RoHS-compliant
Material guide rail Rolled steel
Material yoke plate Anodised wrought aluminium alloy
Material slide Anodised wrought aluminium alloy
Material spindle Rolled steel
Size 60
Reversing backlash theoretical 150 µm
Spindle pitch 12 mm/U
Guide Recirculating ball bearing guide
Type of motor Stepper motor
Spindle type Ball screw drive
Position detection Motor encoder Via proximity switch
Rotor position sensor, encoder measuring principle Magnetic
Display LED
Max. acceleration 5 m/s²
Repetition accuracy ±0.015 mm
Duty cycle 100%
Max. current digital logic outputs 100 mA
Nominal voltage DC 24 V
Rotor position transducer resolution 16 bit
Power supply, connection type Plugs
Power supply, number of pins/wires 4
Approval RCM trademark
CE mark (see declaration of conformity) To EU EMC Directive In accordance with EU RoHS Directive
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Corrosion resistance class CRC 0 - No corrosion stress
Storage temperature -20 °C ... 60 °C
Degree of protection IP40
Ambient temperature 0 °C ... 50 °C
Dynamic basic load rating fixed bearing 13.321 N
Dynamic basic load rating ball screw 4.600 N
Max. force Fz 4.937 N
Max. moment My 30 Nm
Max. radial force at drive shaft 420 N
Reference value effective load, horizontal 10 kg
Static basic load rating ball screw 8.500 N
Feed constant 12 mm/U
Reference value operational performance 5.000 km
Moving mass for 0 mm stroke 675 g
Product weight 3.922 g
Additional weight per 10 mm stroke 95 g
Number of digital logic inputs 2
Working range of logic input 24 V
Features of logic input Configurable Not galvanically isolated
IO-Link, communication mode COM3 (230.4 kBaud)
IO-Link, Number of ports 1
IO-Link, Process data content OUT 1-bit (move in) 1-bit (move out) 1-bit (quit error)
IO-Link, Process data content IN 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out)
IO-Link, Min. cycle time 1 ms
Max. cable length 15 m outputs 15 m inputs 20 m with IO-Link® operation
Switching logic for inputs PNP (positive switching)
Logic interface, connection type Plug
$1,714.16
Stock Ask for quotation
Part number 8083719
Manufacturer Festo
Quantity Unit Price
1+ $1,714.16

  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies