Material spindle | Steel | ||
Material slide | Wrought aluminium alloy Anodised | ||
Material guide slide | Steel | ||
Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
Material end cap | Wrought aluminium alloy Anodised | ||
Dynamic deflection (moving load) | 0.05% of the axis length, max. 0.5 mm | ||
Weight of additional slide | 3.600 g | ||
Feed constant | 10 mm/U | ||
Mass moment of inertia JL per kg of working load | 0,025 kgcm² | ||
Torsional mass moment of inertia It | 247.000 mm⁴ | ||
Max. radial force at drive shaft | 500 N | ||
My at theoretical life value of 100 km (only guide consideration) | 2.502 Nm | ||
Max. moment Mz | 680 Nm | ||
Max. moment Mx | 104 Nm | ||
Fy at theoretical life value of 100 km (only guide consideration) | 20.240 N | ||
Max. force Fy | 5.500 N | ||
Idle torque at vmax | 1,33 Nm | ||
2nd moment of area Iy | 1.240.000 mm⁴ | ||
Degree of protection | IP40 | ||
Max. speed | 0,6 m/s | ||
Max. acceleration | 15 m/s² | ||
Symbol | 991,211 | ||
Type of motor | Stepper motor Servo motor | ||
Guide | Recirculating ball bearing guide | ||
Spindle pitch | 10 mm/U | ||
Stroke reserve | 0 mm | ||
Working stroke | 800 mm |
Material spindle nut | Steel | ||
Material guide rail | Steel | ||
Material drive cover | Wrought aluminium alloy Anodised | ||
Material profile | Wrought aluminium alloy Anodised | ||
Static deflection (load in standstill) | 0.1% of the axis length | ||
Additional weight per 10 mm stroke | 101 g | ||
Moving mass | 4.459 g | ||
Mass moment of inertia JO | 1,038 kgcm² | ||
Mass moment of inertia JH per metre of stroke | 2,756 kgcm² | ||
Max. feed force Fx | 3.400 N | ||
Mz at theoretical life value of 100 km (only guide consideration) | 2.502 Nm | ||
Mx at theoretical life value of 100 km (only guide consideration) | 383 Nm | ||
Max. moment My | 680 Nm | ||
Fz at theoretical life value of 100 km (only guide consideration) | 25.355 N | ||
Max. force Fz | 6.890 N | ||
Idle torque at vmin | 1 Nm | ||
2nd moment of area Iz | 3.800.000 mm⁴ | ||
Ambient temperature | -10 °C ... 60 °C | ||
Repetition accuracy | ±0.02 mm | ||
Max. rotational speed | 3.600 rpm | ||
Functional principle of measuring system | Incremental | ||
Spindle type | Ball screw | ||
Design | Electromechanical linear axis With ball screw | ||
Mounting position | optional | ||
Spindle diameter | 25 mm | ||
Size | 120 |