8069726 Festo

Festo 8069726 integrated drive

Name: 8069726 Festo
Brand: Festo
SKU: 664014-en-usd
Price: 1803.32 USD
Availability: SoldOut

EMCA-EC-67-M-1TE-PN

$1,803.32 Limited stock only available on quotation

Specifications

Series (EMCA)	Motor with controller
Motor type (EC)	EC motor
Flange size, motors (67)	67
Length (M)	Centre
Nominal operating voltage (1)	24 V DC

Electrical connection (T)	Terminal box
Measuring unit (E)	Encoder
Brake	None
Bus protocol/activation (PN)	Profi net
Degree of protection, electrical system	Standard

Technical data

Features of digital logic outputs		Freely configurable in some cases Not galvanically isolated
Configuration support		GSDML file
Rotor position sensor		Absolute single-turn encoder
Protective function		I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Following error monitoring Software end-position detection
Additional functions		Conformance class B DCP IRT-compatible LLDP MRP Real-time class 1 SNMP
Safety Integrity Level (SIL)		Safe torque off (STO)/SIL 2
Display		LED
Nominal rotary speed		3.150 rpm
Brake resistor, external		6 Ohm
Hardware fault tolerance		1
Max. current digital logic outputs		100 mA
Max. negative test pulse with 1 signal		600 µs
Nominal voltage DC		24 V
Parameterisation interface		Ethernet
SFF Safe Failure Fraction		> 90 %
Max. number of process sets		64
Max. output motor		200 W
Permissible voltage fluctuations		+/- 20 %
KC mark		KC-EMV
CE mark (see declaration of conformity)		To EU EMC Directive To EC Machinery Directive
Shock resistance		Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Media redundancy		MRP
Degree of protection		IP54
Note on ambient temperature		Power must be reduced by 1.75% per °C at ambient temperatures above 20°C.
Nominal torque		0,45 Nm
Permissible axial shaft load		60 N
Proof test interval		20 y
Number of digital logic outputs 24 V DC		2
Communication profile		FHPP
Working range of logic input		24 V
Ethernet, supported protocols		TCP/IP
Switching logic for outputs		PNP (positive switching)
Note on materials		Contains paint-wetting impairment substances RoHS-compliant

Controller operating mode		PWM MOSFET power output stage Cascade controller with P position controller PI speed controller PI current regulator
Min. cycle time		2 ms
Rotor position sensor, encoder measuring principle		Magnetic
Topologies		Star Ring Line
Safety function		Safe torque off (STO)
Performance Level (PL)		Safe Torque Off (STO)/category 3, performance level d
Max. rotational speed		3.300 rpm
Baud rate		10/100 Mbit/s (full/half)
Diagnostic coverage		90 %
IP address allocation		FCT DCP
Max. positive test pulse with 0 signal		10.000 µs
Nominal power rating of motor		150 W
Nominal current		7,2 A
Protocol		PROFINET
Operating time absolute encoder		With external battery: up to 6 months Note: the maximum service life of the battery depends on its charging status, the ambient temperature and ageing effects. Without external battery: 3 days (worst case) up to max. 7 days (best case) Note: The maximum storage time depends on the charge state of the internal capacitor, ambient temperature and ageing effects.
Rotor position transducer resolution		12 bit
Peak current		10,3 A
Approval		RCM trademark c UL us - Recognized (OL)
Certificate issuing authority		TÜV 01/205/5514.00/16 UL E331130
Vibration resistance		Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Storage temperature		-25 °C ... 70 °C
Relative air humidity		0 - 95% Non-condensing
Ambient temperature		0 °C ... 50 °C
Mass moment of inertia of rotor		0,301 kgcm²
Peak torque		0,91 Nm
Permissible radial shaft load		100 N
Product weight		2.260 g
Number of digital logic inputs		2
Specification logic input		Based on IEC 61131-2
Features of logic input		Galvanically connected to logic potential
Switching logic for inputs		PNP (positive switching)
Type of mounting		Screw-clamped With through-hole