8034241 Festo

Festo 8034241 integrated drive

Name: 8034241 Festo
Brand: Festo
SKU: 672288-en-usd
Price: 1642.72 USD
Availability: SoldOut

EMCA-EC-67-M-1TM-CO

$1,642.72 Limited stock only available on quotation

Specifications

Series (EMCA)	Motor with controller
Motor type (EC)	EC motor
Flange size, motors (67)	67
Length (M)	Centre
Nominal operating voltage (1)	24 V DC

Electrical connection (T)	Terminal box
Measuring unit (M)	Absolute encoder, multi-turn
Brake	None
Bus protocol/activation (CO)	CANopen
Degree of protection, electrical system	Standard

Technical data

Nominal power rating of motor		150 W
Rotor position sensor		Absolute multi-turn encoder
Protective function		I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Following error monitoring Software end-position detection
Safety Integrity Level (SIL)		Safe torque off (STO)/SIL 2
Display		LED
Nominal rotary speed		3.150 rpm
Diagnostic coverage		90 %
Hardware fault tolerance		1
Max. positive test pulse with 0 signal		10.000 µs
Nominal voltage DC		24 V
Parameterisation interface		Ethernet
SFF Safe Failure Fraction		> 90 %
Max. number of process sets		64
Max. output motor		200 W
Permissible voltage fluctuations		+/- 20 %
KC mark		KC-EMV
CE mark (see declaration of conformity)		To EU EMC Directive To EC Machinery Directive
Shock resistance		Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Storage temperature		-25 °C ... 70 °C
Degree of protection		IP54
Note on ambient temperature		Power must be reduced by 1.75% per °C at ambient temperatures above 20°C.
Nominal torque		0,45 Nm
Permissible axial shaft load		60 N
Proof test interval		20 y
Number of digital logic outputs 24 V DC		2
Communication profile		CiA402 FHPP
Working range of logic input		24 V
Ethernet, supported protocols		TCP/IP
Switching logic for outputs		PNP (positive switching)
Note on materials		Contains paint-wetting impairment substances RoHS-compliant

Controller operating mode		PWM MOSFET power output stage Cascade controller with P position controller PI speed controller PI current regulator
Rotor position sensor, encoder measuring principle		Magnetic
Safety function		Safe torque off (STO)
Performance Level (PL)		Safe Torque Off (STO)/category 3, performance level d
Max. rotational speed		3.300 rpm
Brake resistor, external		6 Ohm
Features of digital logic outputs		Freely configurable in some cases Not galvanically isolated
Max. current digital logic outputs		100 mA
Max. negative test pulse with 1 signal		600 µs
Nominal current		6,9 A
Protocol		CANopen
Operating time absolute encoder		With external battery: up to 6 months Note: the maximum service life of the battery depends on its charging status, the ambient temperature and ageing effects. Without external battery: 3 days (worst case) up to max. 7 days (best case) Note: The maximum storage time depends on the charge state of the internal capacitor, ambient temperature and ageing effects.
Rotor position transducer resolution		12 bit
Peak current		10,3 A
Approval		RCM trademark c UL us - Recognized (OL)
Certificate issuing authority		TÜV 01/205/5514.00/16 UL E331130
Vibration resistance		Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Corrosion resistance class CRC		1 - Low corrosion stress
Relative air humidity		0 - 95% Non-condensing
Ambient temperature		0 °C ... 50 °C
Mass moment of inertia of rotor		0,301 kgcm²
Peak torque		0,91 Nm
Permissible radial shaft load		100 N
Product weight		2.285 g
Number of digital logic inputs		2
Specification logic input		Based on IEC 61131-2
Features of logic input		Galvanically connected to logic potential
Switching logic for inputs		PNP (positive switching)
Type of mounting		Screw-clamped With through-hole