FESTO 8061201 integrated drive

Name: 8061201 FESTO
Brand: FESTO
SKU: 686370-en-usd
Price: 1669.6 USD
Availability: SoldOut

EMCA-EC-67-S-1TE-EP

$1,669.60 Limited stock only available on quotation

Specifications

Electrical connection (T)	Terminal box
Measuring unit (E)	Encoder
Brake	None
Bus protocol/activation (EP)	EtherNet/IP
Degree of protection, electrical system	Standard

Max. positive test pulse with 0 signal		10.000 µs
Rotor position sensor		Absolute single-turn encoder
Protective function		I²t monitoring Temperature monitoring Current monitoring Voltage failure detection Following error monitoring Software end-position detection
Safety Integrity Level (SIL)		Safe torque off (STO)/SIL 2
Display		LED
Nominal rotary speed		3.100 rpm
Diagnostic coverage		90 %
Hardware fault tolerance		1
Max. negative test pulse with 1 signal		600 µs
Nominal voltage DC		24 V
Parameterisation interface		Ethernet
SFF Safe Failure Fraction		> 90 %
Rotor position transducer resolution		12 bit
Peak current		10,2 A
Approval		RCM trademark c UL us - Recognized (OL)
Certificate issuing authority		TÜV 01/205/5514.00/16 UL E331130
Vibration resistance		Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Storage temperature		-25 °C ... 70 °C
Degree of protection		IP54
Note on ambient temperature		Power must be reduced by 1.75% per °C at ambient temperatures above 20°C.
Nominal torque		0,37 Nm
Permissible axial shaft load		60 N
Proof test interval		20 y
Number of digital logic outputs 24 V DC		2
Communication profile		FHPP
Working range of logic input		24 V
Ethernet, supported protocols		TCP/IP
Switching logic for outputs		PNP (positive switching)
Note on materials		Contains paint-wetting impairment substances RoHS-compliant

Controller operating mode		PWM MOSFET power output stage Cascade controller with P position controller PI speed controller PI current regulator
Rotor position sensor, encoder measuring principle		Magnetic
Safety function		Safe torque off (STO)
Performance Level (PL)		Safe Torque Off (STO)/category 3, performance level d
Max. rotational speed		3.500 rpm
Brake resistor, external		6 Ohm
Features of digital logic outputs		Freely configurable in some cases Not galvanically isolated
Max. current digital logic outputs		100 mA
Nominal power rating of motor		120 W
Nominal current		6,9 A
Protocol		EtherNet/IP
Max. number of process sets		64
Max. output motor		158 W
Permissible voltage fluctuations		+/- 20 %
KC mark		KC-EMV
CE mark (see declaration of conformity)		To EU EMC Directive To EC Machinery Directive
Shock resistance		Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Relative air humidity		0 - 95% Non-condensing
Ambient temperature		0 °C ... 50 °C
Mass moment of inertia of rotor		0,175 kgcm²
Peak torque		0,85 Nm
Permissible radial shaft load		100 N
Product weight		1.900 g
Number of digital logic inputs		2
Specification logic input		Based on IEC 61131-2
Features of logic input		Galvanically connected to logic potential
Switching logic for inputs		PNP (positive switching)
Type of mounting		Screw-clamped With through-hole