| Featherkey shaft type | DIN 6885 A 6 x 6 x 22 | ||
| rotor position sensor, DC operating voltage | 5 V | ||
| rotor position sensor, position values per revolution | 1.048.576 | ||
| rotor position sensor, system accuracy of angle measurement | -120 arcsec ... 120 arcsec | ||
| Operating voltage DC for brake | 24 V | ||
| Energy efficiency | ENEFF (CN) / Class 2 | ||
| Note on ambient temperature | Up to 60°C with derating of -1.5% per degree Celsius | ||
| Note on max. installation height | As of 1,000 m: only with derating of -1.0% per 100 m | ||
| Relative air humidity | 0 - 90% | ||
| Temperature class as per EN 60034-1 | F | ||
| Rating class as per EN 60034-1 | S1 | ||
| Motor type to EN 60034-7 | IM B5 IM V1 IM V3 | ||
| Degree of protection | IP65 | ||
| Concentricity, coaxiality, axial runout to DIN SPEC 42955 | N | ||
| Storage lifetime under nominal conditions | 20.000 h | ||
| Electrical connection 1, connector system | Connection pattern RE | ||
| Electrical connection 1, connection pattern | 995,792 | ||
| Note on materials | RoHS-compliant | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
| CE mark (see declaration of conformity) | To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
| Certificate issuing authority | UL E342973 | ||
| Nominal voltage DC | 300 V | ||
| Number of pole pairs | 3 | ||
| Nominal torque | 2,39 Nm | ||
| Nominal rotary speed | 3.000 rpm | ||
| Max. mechanical speed | 10.000 rpm | ||
| Continuous stall current | 4,2 A | ||
| Peak current | 11,4 A | ||
| Voltage constant, phase-to-phase | 40 mVmin | ||
| Phase-phase winding inductance | 10,5 mH | ||
| Measuring flange | 255 x 255 x 8 mm, aluminium | ||
| Product weight | 3.400 g | ||
| Permissible radial shaft load | 335 N | ||
| rotor position sensor, manufacturer designation | MAR-MX50AHN00 | ||
| Rotor position encoder interface | Nikon A-format |
| Rotor position sensor, encoder measuring principle | Optical | ||
| rotor position sensor, DC operating voltage range | 4,75 V ... 5,25 V | ||
| Rotor position transducer resolution | 20 bit | ||
| Brake holding torque | 3,2 Nm | ||
| Power consumption, brake | 11,5 W | ||
| Ambient temperature | -15 °C ... 40 °C | ||
| Max. installation height | 4.000 m | ||
| Storage temperature | -20 °C ... 55 °C | ||
| Conforms to standard | IEC 60034 | ||
| Max. winding temperature | 155 °C | ||
| Temperature monitoring | Digital motor temperature transmission via Nikon A format | ||
| Mounting position | optional | ||
| Note on degree of protection | IP40 for motor shaft without rotary shaft seal IP54 for motor shaft with rotary shaft seal IP65 for motor housing without connection technology | ||
| Balance quality | G 2.5 | ||
| Electrical connection 1, connection type | Plugs | ||
| Electrical connection 1, number of connections/cores | 6 | ||
| Pollution degree | 2 | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
| Approval | c UL us - Recognized (OL) | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for electrical equipment To UK RoHS instructions | ||
| Nominal operating voltage DC | 300 V | ||
| Type of winding switch | Star inside | ||
| Standstill torque | 2,63 Nm | ||
| Peak torque | 7,17 Nm | ||
| Max. rotational speed | 5.000 rpm | ||
| Nominal power rating of motor | 750 W | ||
| Nominal motor current | 3,8 A | ||
| Motor constant | 0,662 Nm/A | ||
| Phase-phase winding resistance | 2,1 Ohm | ||
| Electric time constant | 5 ms | ||
| Total mass moment of inertia of output | 0,978 kgcm² | ||
| Permissible axial shaft load | 167,5 N | ||
| Rotor position sensor | Absolute multi-turn encoder | ||
| rotor position sensor, absolute detectable revolutions | 65.54 |
