Specifications
Series (EPCS) | Electric cylinder |
---|---|
Drive system (BS) | Ball screw drive |
Size (45) | 45 |
Stroke [mm] (250) | 250 |
Spindle pitch (10P) | 10 mm |
Position sensing (A) | For proximity sensor |
Motor type (ST) | Stepper motor ST |
Controller (M) | Integrated |
---|---|
Control panel (H1) | Integrated |
Bus protocol/activation (PLK) | PNP and IO-Link® |
End-position sensing (AA) | With integrated end-position sensing |
Cable outlet direction | Standard |
Motor attachment position | Standard |
Electrical accessories | None |
Logic interface, connection technology | M12x1, A-coded according to EN 61076-2-101 | ||
IO-Link, Data storage required | 500 Byte | ||
Switching logic for outputs | NPN (negative switching) PNP (positive switching) | ||
Logic interface, connection type | Plug | ||
Logic interface, plug pattern | 00992264 | ||
Note on materials | RoHS-compliant | ||
Material piston rod | High-alloy stainless steel | ||
Material spindle | Rolled steel | ||
Stroke | 250 mm | ||
Piston rod thread | M10x1.25 | ||
Spindle diameter | 10 mm | ||
Torsional backlash at piston rod +/- | 1 deg | ||
Piston-rod end | Male thread | ||
Design | Electric cylinder With ball screw drive With integrated drive | ||
Symbol | 00997294 | ||
Referencing | Positive fixed stop block Negative fixed stop block Reference switch | ||
Rotor position sensor, encoder measuring principle | Magnetic | ||
Display | LED | ||
Max. acceleration | 5 m/s² | ||
Repetition accuracy | ±0.02 mm | ||
Duty cycle | 100% | ||
Max. current digital logic outputs | 100 mA | ||
Nominal voltage DC | 24 V | ||
Parameterisation interface | IO-Link User interface | ||
Permissible voltage fluctuations | +/- 15% | ||
power supply, connection system | M12x1, T-coded according to EN 61076-2-111 | ||
Power supply, connection pattern | 00995989 | ||
KC mark | KC-EMV | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Relative air humidity | 0 - 90% Non-condensing | ||
Ambient temperature | 0 °C ... 50 °C | ||
Max. moment Mx | 0 Nm | ||
Max. moment Mz | 2,9 Nm | ||
Max. feed force Fx | 250 N | ||
Reference value effective load, vertical | 13 kg | ||
Additional moving mass per 10 mm stroke | 4,9 g | ||
Basic weight for 0 mm stroke | 1.185 g | ||
Number of digital logic outputs 24 V DC | 2 | ||
Specification logic input | Based on IEC 61131-2, type 1 | ||
Features of logic input | Configurable Not galvanically isolated | ||
IO-Link, Protocol version | Device V 1.1 | ||
IO-Link, Port class | A | ||
IO-Link, Process data length OUT | 2 bytes | ||
IO-Link, Process data length IN | 2 bytes | ||
IO-Link, Service data IN | 32-bit force 32-bit position 32-bit speed |
IO-Link, Min. cycle time | 1 ms | ||
Max. cable length | 15 m outputs 15 m inputs 20 m with IO-Link® operation | ||
Switching logic for inputs | NPN (negative switching) PNP (positive switching) | ||
Logic interface, number of pins/wires | 8 | ||
Type of mounting | Via female thread With accessories | ||
Material housing | Smooth-anodised wrought aluminium alloy | ||
Material spindle nut | Steel | ||
Size | 45 | ||
Stroke reserve | 0 mm | ||
Reversing backlash theoretical | 100 µm | ||
Spindle pitch | 10 mm/U | ||
Mounting position | optional | ||
Type of motor | Stepper motor | ||
Spindle type | Ball screw drive | ||
Protection against torque/guide | With plain-bearing guide | ||
Rotor position sensor | Absolute single-turn encoder | ||
Additional functions | User interface Integrated end-position sensing | ||
Ready status indication | LED | ||
Max. speed | 0,23 m/s | ||
Features of digital logic outputs | Configurable Not galvanically isolated | ||
Insulation protection class | B | ||
Max. current consumption | 3.000 mA | ||
Nominal current | 3 A | ||
Rotor position transducer resolution | 16 bit | ||
Power supply, connection type | Plugs | ||
Power supply, number of pins/wires | 4 | ||
Approval | RCM trademark | ||
CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
Corrosion resistance class CRC | 0 - No corrosion stress | ||
Storage temperature | -20 °C ... 60 °C | ||
Degree of protection | IP40 | ||
Note on ambient temperature | Power must be reduced by 2% per K at ambient temperatures above 30°C. | ||
Max. moment My | 2,9 Nm | ||
Max. radial force at drive shaft | 180 N | ||
Reference value effective load, horizontal | 40 kg | ||
Moving mass for 0 mm stroke | 179 g | ||
Product weight | 2.210 g | ||
Additional weight per 10 mm stroke | 41 g | ||
Number of digital logic inputs | 2 | ||
Working range of logic input | 24 V | ||
IO-Link, SIO-Mode support | Yes | ||
IO-Link, communication mode | COM3 (230.4 kBaud) | ||
IO-Link, Number of ports | 1 | ||
IO-Link, Process data content OUT | 1-bit (move in) 1-bit (move out) 1-bit (quit error) | ||
IO-Link, Process data content IN | 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out) |
Stock | Ask for quotation |
---|---|
Part number | 8118285 |
Manufacturer | Festo |
Quantity | Unit Price |
---|---|
1+ | $1,332.43 |