Material cylinder barrel | Smooth-anodised wrought aluminium alloy | ||
Material spindle nut | Rolled steel | ||
Material piston rod | High-alloy stainless steel | ||
Note on materials | RoHS-compliant | ||
Type of mounting | Via female thread Or accessories | ||
Max. feed force Fx | 1.000 N | ||
Ambient temperature | 0 °C ... 60 °C | ||
Relative air humidity | 0 - 95% | ||
Storage temperature | -20 °C ... 60 °C | ||
Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
Corrosion resistance class CRC | 0 - No corrosion stress 2 - Moderate corrosion stress | ||
Protection against torque/guide | With plain-bearing guide | ||
Symbol | 00991941 | ||
Position detection | Via proximity switch | ||
Mounting position | optional | ||
Torsional backlash at piston rod +/- | 0,25 deg | ||
Piston rod thread | M10x1.25 | ||
Size | 32 |
Material spindle | Rolled steel | ||
Material screws | Galvanised steel | ||
Material cover | Wrought aluminium alloy, smooth anodised | ||
Interface code, actuator | D32 | ||
Frictional torque independent of load | 0,1 Nm | ||
Max. radial force at drive shaft | 115 N | ||
Degree of protection | IP40 | ||
Suitable for use with food | See supplementary material information | ||
Cleanroom class | Class 7 according to ISO 14644-1 | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Duty cycle | 100% | ||
Variants | Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. | ||
Design | Electric cylinder with ball screw Electric cylinder with lead screw spindle | ||
Type of motor | Stepper motor Servo motor | ||
Based on standard | ISO 15552 | ||
Spindle diameter | 12 mm | ||
Stroke | 30 mm ... 800 mm |