| Outside diameter bearing | D | 210 | mm |
| Basic dynamic load rating, axial | Ca | 1,200,000 | |
| Inner diameter bearing | d | 100 | mm |
| Height | T | 59 | mm |
| Basic static load rating, axial | C0a | 6,020,000 |
| Edge Spacing | r1smin | 0.30 | mm |
| Connection measure Inner ring | da max | 155 | mm |
| Ball diameter | dK | 220 | mm |
| Front surface diameter of shaft washer | d3 | 155 | mm |
| Width Outer ring | C | 42 | mm |
| Distance lubrication Bore | A | 15 | mm |
| Bore diameter bearing, lower tolerance | dUT | -0.02 | mm |
| Height, lower tolerance | TUT | -0.40 | mm |
| Connection measure Inner ring | d2 | 195.50 | mm |
| Width Inner ring | B | 50 | mm |
| Plane Surface Spacing | s | 45 | mm |
| Tilt angle | α | 7 | ° |
| Outside diameter, lower tolerance | Do UT | -0.03 | mm |
| Width inner ring, lower tolerance | BUT | -0.40 | mm |
