| Bore diameter bearing | d | 25 | mm |
| Width inner ring | B | 20 | mm |
| Basic static load rating, radial | C0r | 233,000 |
| Outside diameter bearing | D | 42 | mm |
| Basic dynamic load rating, radial | Cr | 60,500 |
| Connection measure Inner ring | da max | 29.30 | mm |
| Width Outer ring | C | 16 | mm |
| Tilt angle | α | 7 | ° |
| Bore diameter bearing, lower tolerance | dUT | -0.01 | mm |
| Radial Clearance | Gr | 0,05 - 0,1 |
| Ball diameter | dK | 35.50 | mm |
| Edge Spacing | r1smin | 0.60 | mm |
| Outside diameter, lower tolerance | Do UT | -0.01 | mm |
| Width inner ring, lower tolerance | BUT | -0.12 | mm |
| Manufacturer | Part Number |
|---|---|
| Scholz & Co. | GL25 |
| IKO | GE25ES (IKO) |
| Scholz & Co. | GLS/J25 |
| Scholz & Co. | GE25DSS |
| Torrington | 25FS42 |
| NSK | 25FSF42 |
| ADR | GE25 |
| Askubal | GE25 |
| Scholz & Co. | GE25 |
| ADR | GE25D |
| Elges | GE25DA |
| Elges | GE25DG |
| Askubal | GE25DO |
| Elges | GE25DO |
| KGM-Kugeln | GL25 |
| Scholz & Co. | GLS/A25 |
| Scholz & Co. | GLS/J/A25 |
| GPZ Bearings | III-25 |
| GPZ Bearings | IIIC-25 |
| Elges | GE25DS |
| NTN | SA1-25 |
| Scholz & Co. | GE25DS |
| SKF | GE25DSS |
| SKF | GE25 ES (SKF) |
| RBC | MB25 |
| Deutsche Kugellagerfabriken | ZPS25 |
