Basic dynamic load rating, radial | Cr | 29,600 | |
Bore diameter bearing | d | 20 | mm |
Width inner ring, | B | 20 | mm |
Basic static load rating, radial | C0r | 41,500 | |
Outside diameter bearing | D | 35 | mm |
Ball diameter | dK | 29 | mm |
Outer eye diameter | d2 | 47 | mm |
Shank diameter | d4 | 25 | mm |
Width of the rod end | C1 | 17 | mm |
Thread length Internal thread | l3 | 23 | mm |
Distance drilling with/shaft start | l7 | 22 | mm |
Shank diameter, large | d5 | 47 | mm |
Edge Spacing | r1smin | 0.30 | mm |
Cylinder Force | FZ | 20,000 | |
Bore diameter bearing, upper tolerance | dOT | 0.02 | mm |
Width inner ring, lower tolerance | BUT | -0.21 | mm |
Outer flange diameter inner ring | d1 | 25 | mm |
Thread size | d3 | M16x1,5 | |
Shank Length Internal thread head | h1 | 52 | mm |
Tilt angle | α | 4 | ° |
Total length internal thread head | l4 | 75.50 | mm |
Welding Shank Diameter | d 7 | M8x20 | |
Width | B | 17 | mm |
Radial Clearance | Gr | 0,03 - 0,082 | |
Tightening torque | MA | 32 | Nm |
Bore diameter bearing, tolerance | dT | H7 |
Manufacturer | Part Number |
---|---|
SKF | SIQG20 ES (SKF) |