Ball diameter | dK | 29 | mm |
Outer eye diameter | d2 | 56 | mm |
Shank diameter | d4 | 25 | mm |
Width of the rod end | C1 | 19 | mm |
Thread length Internal thread | l3 | 17 | mm |
Distance drilling with/shaft start | l7 | 25 | mm |
Shank diameter, large | d5 | 41 | mm |
Radial Clearance | Gr | 0,03 - 0,082 | |
Bore diameter bearing, lower tolerance | dUT | -0.01 | mm |
Outer flange diameter inner ring | d1 | 24.20 | mm |
Thread size | d3 | M16x1,5 | |
Shank Length Internal thread head | h1 | 50 | mm |
Tilt angle | α | 9 | ° |
Total length internal thread head | l4 | 78 | mm |
Welding Shank Diameter | d 7 | M8x20 | |
Edge Spacing | r1smin | 0.30 | mm |
Tightening torque | MA | 32 | Nm |
Width inner ring, lower tolerance | BUT | -0.12 | mm |
Bore diameter bearing | d | 20 | mm |
Width inner ring, | B | 16 | mm |
Basic static load rating, radial | C0r | 81,100 |
Outside diameter bearing | D | 35 | mm |
Basic dynamic load rating, radial | Cr | 29,600 |
Manufacturer | Part Number |
---|---|
SKF | SIR20 E-S (SKF) |