Bore diameter | d | 15 | mm |
Width | B | 11 | mm |
Basic static load rating, radial | C0r | 4,800 | |
Limiting speed for grease lubrication | nG Grease | 56,000 |
Outside diameter | D | 35 | mm |
Basic dynamic load rating, radial | Cr | 11,600 | |
Fatigue load limit, radial | Cur | 395 | N |
Limiting speed for oil lubrication | nG Oil | 85,000 |
Diameter shaft shoulder | da | 19.50 | mm |
Shoulder diameter outer ring | Da | 30.50 | mm |
Maximum recess radius | ra max | 0.30 | mm |
Maximum diameter injection pitch | Etk max | 23.40 | mm |
Diameter shaft shoulder clearance | da | h12 | |
Shoulder diameter outer ring clearance | Da | H12 | |
Minimum diameter injection pitch | Etk min | 21.70 | mm |
Distance between the apexes of the pressure cones | a | 8.80 | mm |
Minimum chamfer dimension | rmin | 0.60 | mm |
Contact angle | α | 15 | ° |