| Bore diameter | d | 45 | mm |
| Width | B | 16 | mm |
| Basic static load rating, radial | C0r | 7,500 | |
| Limiting speed for grease lubrication | nG Grease | 26,000 |
| Outside diameter | D | 75 | mm |
| Basic dynamic load rating, radial | Cr | 12,300 | |
| Fatigue load limit, radial | Cur | 790 | N |
| Limiting speed for oil lubrication | nG Oil | 40,000 |
| Diameter shaft shoulder | da | 51 | mm |
| Shoulder diameter outer ring | Da | 69 | mm |
| Maximum recess radius | ra max | 0.30 | mm |
| Maximum diameter injection pitch | Etk max | 58.20 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 54.60 | mm |
| Distance between the apexes of the pressure cones | a | 16 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Contact angle | α | 15 | ° |
| Manufacturer | Part Number |
|---|---|
| RHP | T7009CTSULP2 |
| Fafnir | 2MMV9109HX-CRUL |
| RHP | T7009CTSULP3 |
| Fafnir | 2MMV99109WN-CRUL |
| SKF | 7009FBGA/P7 |
| KOYO | ACH009CGLFTP4 |
| SNFA | HX45-7CE1-UL |
| SKF | 7009-CE-GA/P4A (SKF) |
| SNFA | VEX45-7CE1-UL |
