| Material setting screw | High-alloy steel | ||
| Material sensor rail | Wrought aluminium alloy Anodised | ||
| Material swivel lever | Case-hardened steel Burnished | ||
| Material retaining bracket | Wrought aluminium alloy Anodised | ||
| Material spring pressure piece | High-alloy steel | ||
| Material stops | High-alloy steel | ||
| Product weight | 5.200 g | ||
| Max. radial force at drive shaft | 75 N | ||
| Max. moment Mz | 2,5 Nm | ||
| Max. moment Mx | 2,5 Nm | ||
| Max. drive torque at drive shaft | 2,5 Nm | ||
| Repetition accuracy end positions | +/-0.02 mm | ||
| Design | Drive shaft Linear guide plus ball bearing Force pilot operated motion sequence | ||
| Cushioning | Noise reduction via buffers | ||
| Max. linear stroke with 90° swivel angle | 175/175 mm | ||
| Working stroke | 20 mm ... 35 mm |
| Material bar | Wrought aluminium alloy Anodised | ||
| Material slotted guide plate | Case-hardened steel Hardened | ||
| Material cross-guide | Tempered steel | ||
| Material base plate | Wrought aluminium alloy Anodised | ||
| Material cover | Wrought aluminium alloy Anodised | ||
| Type of mounting | Via through-hole and centring sleeve | ||
| Max. process force in Y direction | 50 N | ||
| Max. effective load | 1,5 kg | ||
| Max. moment My | 2,5 Nm | ||
| Max. axial force at drive shaft | 30 N | ||
| Ambient temperature | 0 °C ... 60 °C | ||
| Position detection | Via proximity switch | ||
| Mounting position | optional | ||
| Z stroke | 80 mm ... 100 mm | ||
| Size | 16 |
