| model | ise40a | ||
| display/set pressure range | ?15.2 to 152.3 psi | ||
| display/minimum unit setting | 0.1 psi | ||
| power supply voltage | 12 to 24 vdc ?10%, ripple (p-p) 10% or less (with power supply polarity protection) | ||
| switch output | npn or pnp open collector 2 outputs (selectable) | ||
| maximum applied voltage | 28 v (at npn output) | ||
| response time | 2.5 ms (with anti-chattering function: 20, 100, 500, 1000, 2000 ms) | ||
| repeat accuracy | ?0.2% f.s. ?1 digit | ||
| hysteresis - window comparator mode | variable (0 or above) note 1) | ||
| analog output - note 2) voltage output - linearity | approx. 1 k | ||
| analog output - note 3) current output - output current(rated pressure range) | ?1% f.s. or less | ||
| auto-shift input | non-voltage input (reed or solid state), low level: 0.4 v or less, 5 ms or longer input | ||
| display accuracy | ?2% f.s. ?1 digit (ambient temperature of 77 ?5f) | ||
| environment resistance - enclosure | ip65 | ||
| environment resistance - operating humidity range | operating/stored: 35 to 85% rh (no condensation) | ||
| environment resistance - insulation resistance | 50 m or more between live parts and case (at 500 vdc mega) | ||
| environment resistance - impact resistance | 100 m/s2 in x, y, z directions, 3 times each (de-energized) | ||
| lead wire | oilproof heavy-duty vinyl cable?3.5, 2 m conductor area: 0.15 mm2 (awg26) insulator o.d.: 0.95 mm | ||
| Weight | .37225 lb |
| rated pressure range | ?14.5 to 145.0 psi | ||
| withstand pressure | 218 psi | ||
| applicable fluid | air, non-corrosive gas, non-flammable gas | ||
| Current consumption | 45 ma or less | ||
| maximum load current | 80 ma | ||
| residual voltage | 1 v or less | ||
| short circuit protection | yes | ||
| hysteresis - hysteresis mode | variable (0 or above) note 1) | ||
| analog output - note 2) voltage output - output voltage(rated pressure range) | 0.6 to 5 v ?2.5% f.s. | ||
| analog output - note 3) current output - output impedance | 2.4 to 20 ma ?2.5% f.s. | ||
| analog output - note 3) current output - load impedance | maximum load impedance: 300 (power supply voltage 12 v)600 (power supply voltage 24 v)minimum load impedance: 50 | ||
| Display | 3 1/2-digit, 7-segment, 2-color lcd (red/green) | ||
| indicator light | lights up when output is turned on. out1, out2: orange | ||
| environment resistance - operating temperature range | operating: 23 to 122f, stored: 14 to 140f (no freezing or condensation) | ||
| environment resistance - withstand voltage | 1000 vac for 1 minute between live parts and case | ||
| environment resistance - vibration resistance | 10 to 150 hz at whichever is smaller of 1.5 mm amplitude or 20 m/s2 acceleration, in x, y, z directions, for 2 hours each (de-energized) | ||
| temperature characteristics | ?2% f.s. (based on 77f) | ||
| Standards | ce marking, ul (csa), rohs compliance |
