| Bore diameter | d | 95.25 | mm |
| Width, inner ring | Bi | 36.32 | mm |
| Width, total | T | 39.69 | mm |
| Basic static load rating, radial | C0r | 285,000 | |
| Limiting speed | nG | 4,600 |
| Outside diameter | D | 152.40 | mm |
| Width, outer ring | B | 30.16 | mm |
| Basic dynamic load rating, radial | Cr | 182,000 | |
| Fatigue load limit, radial | Cur | 34,500 |
| Maximum diameter of shaft shoulder | da max | 104 | mm |
| Maximum diameter of housing shoulder | Da max | 140 | mm |
| Maximum fillet radius of shaft | ra max | 3.60 | mm |
| Minimum diameter of shaft shoulder | db min | 110 | mm |
| Minimum axial space | Ca min | 9 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 3.60 | mm |
| Distance between the apexes of the pressure cones | a | 37 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 3.30 | mm |
| Guidance rib diameter of inner ring | d1 | 122.70 | mm |
