| Bore diameter | d | 50.80 | mm |
| Width, inner ring | Bi | 32.79 | mm |
| Width, total | T | 36.51 | mm |
| Basic static load rating, radial | C0r | 150,000 | |
| Limiting speed | nG | 6,000 |
| Outside diameter | D | 123.825 | |
| Width, outer ring | B | 25.40 | mm |
| Basic dynamic load rating, radial | Cr | 135,000 | |
| Fatigue load limit, radial | Cur | 18,300 |
| Maximum diameter of shaft shoulder | da max | 67 | mm |
| Minimum axial space | Ca min | 8.50 | mm |
| Minimum diameter of shaft shoulder | db min | 77 | mm |
| Maximum fillet radius of shaft | ra max | 3.60 | mm |
| Minimum chamfer dimension of inner ring back face | r1, 2 min | 3.60 | mm |
| Distance between the apexes of the pressure cones | a | 38 | mm |
| Minimum chamfer dimension of outer ring back face | r3, 4 min | 3.20 | mm |
| Guidance rib diameter of inner ring | d1 | 86.80 | mm |
