| for shaft o.d. (mm) | 25 | ||
| ball rows | 6 | ||
| inscribed bore diameter - tolerance - mm | 0-0.012 | ||
| outer diameter - tolerance - mm | 0-0.019 | ||
| overall length - tolerance - mm | ±0.3 | ||
| flange diameter - tolerance - mm | 0-0.2 | ||
| pilot - tolerance - mm | ±0.2 | ||
| h - mm | 52 | ||
| mounting holed1xd2xh - mm | 5.5x9x5.4 | ||
| eccentricity(max) - µm | 15 | ||
| basic load rating - dynamic c - n | 1,560 | ||
| mass - g | 498 |
| dust protection seal | no seal | ||
| inscribed bore diameter - dr - mm | 25 | ||
| outer diameter - d - mm | 40 | ||
| overall length - l - mm | 112 | ||
| flange diameter - d1 - mm | 62 | ||
| pilot - i - mm | 52 | ||
| d2 - mm | 40 | ||
| pcd - mm | 51 | ||
| flangeperpen-dicularity - µm | 15 | ||
| radialclearancetolerance - µm | -9 | ||
| basic load rating - static c0 - n | 3,140 |
