Festo 567796 solenoid valve

Name: 567796 Festo
Brand: Festo
SKU: 683144-en-usd
Price: 118.26 USD
Availability: SoldOut

MHJ10-S-2,5-HF/LP

$118.26 Limited stock only available on quotation

Specifications

Valve function		2/2-way, closed, monostable
Construction width		10 mm
pneumatic working port		Sub-base
Operating pressure		0,5 bar ... 4 bar
Type of reset		Pneumatic spring
Approval		RCM trademark
CE mark (see declaration of conformity)		To EU EMC Directive
Note on operation		Fixed power supply must be able to supply at least 1.7 A without voltage drop Do not operate without flow. For block mounting with flow, max. ambient temperature 45°C.
Mounting position		optional
Type of piloting		Direct
Symbol		992,259
Additional functions		Spark arresting Holding current reduction with energy recovery Safety shut-off
C value		0,66 l/sbar
Switching time on 0.4 MPa (4 bar, 58 psi) and 24 V in new condition		1 ms
Switching time on 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition		0,8 ms
Tolerance switching time off		+15%/-25%
Operational voltage range DC		21,6 V ... 26,4 V
Duty cycle		100%
Trigger signal voltage range DC		3 V ... 30 V
Permissible voltage fluctuations		+/- 10 %
Note on operating and pilot medium		Lubricated operation not possible
Corrosion resistance class CRC		2 - Moderate corrosion stress
Storage temperature		-20 °C ... 50 °C
Media temperature		-5 °C ... 60 °C
Max. tightening torque for valve mounting		0,7 Nm
Electrical connection		3-wire Cable
Type of mounting		On sub-base
Pneumatic connection, port 2		Sub-base
Material seals		HNBR
Material cable sheath		PUR

Type of actuation		Electric
Standard nominal flow rate		160 l/min
Operating voltage		24V DC
Design		Poppet valve without spring return
Degree of protection		IP55
KC mark		KC-EMV
Grid dimension		10,5 mm
Sealing principle		Hard
Manual override		None
Flow direction		Non-reversible
Reverse polarity protection		For operating voltage
b value		0,36
Max. switching frequency		500 Hz
Switching time off 0.4 MPa (4 bar, 58 psi) and 24 V in new condition		0,5 ms
Switching time off 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition		0,6 ms
Tolerance switching time on		+/-15%
Input resistance		34 kOhm
Characteristic coil data		24 V DC: low-current phase 2.0 W, high-current phase 7.0 W
Note on input current		Linear rise 0.09-0.44 mA with a trigger signal of 3-15 V 0.44-15.44 mA with a trigger signal of 15-30 V
Operating medium		Compressed air to ISO 8573-1:2010 [7:4:4]
Restrictions for environmental and media temperature		As a function of switching frequency (see graph)
LABS (PWIS) conformity		VDMA24364-B2-L
Permissible solenoid surface temperature		120 °C
Ambient temperature		-5 °C ... 60 °C
Product weight		75 g
Cable length		2,5 m
Pneumatic connection, port 1		Sub-base
Note on materials		RoHS-compliant
Material housing		PA-reinforced PPS reinforced
Material screws		Steel