| CE mark (see declaration of conformity) | To EU EMC Directive | ||
| Ambient temperature | -30 °C ... 100 °C | ||
| Max. wiper current, short-time | 10.000 µA | ||
| Max. travel acceleration | 200 m/s² | ||
| Non-dependent linearity | 0.04% | ||
| Stroke | 750 mm | ||
| Connection resistance | 10 kOhm | ||
| Nominal operating voltage DC | 10 V | ||
| Permissible voltage fluctuations | < 1% | ||
| Electrical connection | 4-pin Type A Plugs To DIN 43650 Square design | ||
| Parallel offset of coupling | ± 1.5 mm | ||
| Mounting position | optional | ||
| Material housing | Wrought aluminium alloy Anodised | ||
| Material slide housing | Die-cast aluminium Polymer | ||
| Material cover | Polymer | ||
| Degree of protection at top | To IEC 60529 | ||
| Vibration resistance to DIN/IEC 68 Part 2-6 | Tested to severity level 2 |
| Functional principle of measuring system | Analogue | ||
| Recommended wiper current | < 1 µA | ||
| Max. travel speed | 10 m/s | ||
| Displacement resolution | 0,01 mm | ||
| Temperature coefficient | 5 ppm/K | ||
| Output signal | Analogue | ||
| Connection resistance tolerance | 20 % | ||
| Max. operating voltage DC | 42 V | ||
| Max. current consumption | 4 mA | ||
| Design | With cover strip With moving slide Open profile | ||
| Angle offset of driver | ± 1 ° | ||
| Product weight | 1.800 g | ||
| Material covering | Steel | ||
| Material slide coupling | Steel | ||
| Material mounting clips | PEI | ||
| Degree of protection at bottom | To IEC 60529 | ||
| Continuous shock resistance to DIN/IEC 68 Part 2-82 | Tested to severity level 2 |
