Type of actuation | Electric | ||
Manual override | Detenting Non-detenting | ||
Type of reset | Mechanical spring | ||
Pilot air supply | Internal | ||
Valve function | 2/2 | ||
Switching position indicator | With accessories | ||
Standard nominal flow rate | 1.000 l/min ... 2.000 l/min | ||
Approval | c UL us - Recognized (OL) | ||
CE mark (see declaration of conformity) | To EU EMC Directive To EU Explosion Protection Directive (ATEX) To EU Low Voltage Directive | ||
ATEX category gas | II 3G | ||
Explosion ignition protection type for gas | Ex nA IIC T4 X Gc | ||
Explosion ambient temperature | -10°C <= Ta <= +60°C | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Suitable for use with food | See supplementary material information | ||
Degree of protection | IP65 | ||
Product weight | 263 g | ||
Type of mounting | In-line installation With accessories Either: | ||
Material seals | NBR |
Mounting position | optional | ||
Design | Piston seat | ||
Type of piloting | Pilot actuated | ||
Flow direction | Non-reversible | ||
Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4 Prepared for G1/8 Via pressure sensor With pressure gauge | ||
Operating pressure | 4 bar ... 14 bar | ||
Duty cycle | 100% | ||
KC mark | KC-EMV | ||
Explosion protection | Zone 2 (ATEX) Zone 22 (ATEX) | ||
ATEX category dust | II 3D | ||
Explosion ignition protection type for dust | Ex tc IIIC T105°C X Dc IP65 | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gases | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Media temperature | -10 °C ... 60 °C | ||
Ambient temperature | -10 °C ... 60 °C | ||
Signal status display | With accessories | ||
Note on materials | RoHS-compliant | ||
Material housing | Die-cast aluminium |