Differential pressure display | Visual display Via pressure sensor | ||
Pressure regulation range | 1 bar ... 12 bar | ||
Characteristic coil data | 110 V AC: 50/60 Hz, pick-up power 3.0 VA, holding power 2.4 VA 230 V AC: 50/60 Hz, pick-up power 3.0 VA, holding power 2.4 VA 24 V DC: 1.5 W 24 V DC: 1.8 W | ||
CE mark (see declaration of conformity) | To EU EMC Directive To EU Explosion Protection Directive (ATEX) To EU Low Voltage Directive | ||
ATEX category gas | II 2G II 3G | ||
Explosion ignition protection type for gas | Ex h IIC T6 Gb X Ex nA IIC T4 X Gc | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
Suitable for use with food | See supplementary material information | ||
Ambient temperature | -10 °C ... 60 °C | ||
Pneumatic connection, port 1 | G1/8 G1/4 | ||
Pneumatic connection, port 3 | G1/4 | ||
Material bowl | PC | ||
Size | 4 | ||
Type of actuation | Electric Manual Pneumatic | ||
Mounting position | optional Vertical +/-5° | ||
Condensate drain | Fully automatic Manually rotating Semi-automatic | ||
Controller function | Output pressure constant Via primary pressure compensation With secondary venting With return flow function | ||
Symbol | 00991761 |
Operating pressure | 1,5 bar ... 14 bar | ||
Standard nominal flow rate | 800 l/min ... 1.400 l/min | ||
Approval | c UL us - Recognized (OL) | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
ATEX category dust | II 2D II 3D | ||
Explosion ignition protection type for dust | Ex h IIIC T60°C Db X Ex tc IIIC T105°C X Dc IP65 | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Storage temperature | -10 °C ... 60 °C | ||
Media temperature | -10 °C ... 60 °C | ||
Type of mounting | With accessories | ||
Pneumatic connection, port 2 | G1/8 G1/4 | ||
Material housing | Die-cast aluminium | ||
Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Via pressure sensor With pressure gauge | ||
Series | MS | ||
Actuator lock | Rotary knob with integrated lock | ||
Grade of filtration | 0,01 µm ... 40 µm | ||
Design | Branching module Active carbon filter Pressure regulator with pressure gauge Soft-start valve On/off valve Fibre filter Filter regulator with pressure gauge Filter regulator without pressure gauge Membrane air dryer Proportional standard mist lubricator Sintered filter with centrifugal separator With non-return function | ||
Bowl guard | Plastic bowl guard |