| Maximum recess radius | ra max | 0.60 | mm |
| diameter shaft shoulder tolerance | h12 | ||
| diameter of housing shoulder tolerance | H12 |
| Diameter shaft shoulder | da | 49 | mm |
| diameter of housing shoulder | Da | 62.10 | mm |
| Injection pitch diameter min | Etk 1 nom | 59.80 | mm |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Raceway diameter outer ring | E | 61 | mm |
| Axial displacement | s1 | 3.10 | mm |
| Bore diameter | d | 40 | mm |
| Width | B | 15 | mm |
| Basic static load rating, radial | C0r | 26,000 | |
| Limiting speed for grease lubrication | nG Grease | 17,100 |
| Outside diameter | D | 68 | mm |
| Basic dynamic load rating, radial | Cr | 27,000 | |
| Fatigue load limit, radial | Cur | 4,200 | |
| Limiting speed for oil lubrication | nG Oil | 20,100 |
