| Maximum recess radius | ra max | 1 | mm |
| diameter shaft shoulder tolerance | h12 | ||
| diameter of housing shoulder tolerance | H12 |
| Diameter shaft shoulder | da | 110 | mm |
| diameter of housing shoulder | Da | 133.50 | mm |
| Injection pitch diameter min | Etk 1 nom | 129.80 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Raceway diameter outer ring | E | 132 | mm |
| Axial displacement | s1 | 4.40 | mm |
| Bore diameter | d | 95 | mm |
| Width | B | 24 | mm |
| Basic static load rating, radial | C0r | 117,000 | |
| Limiting speed for grease lubrication | nG Grease | 7,700 |
| Outside diameter | D | 145 | mm |
| Basic dynamic load rating, radial | Cr | 99,000 | |
| Fatigue load limit, radial | Cur | 18,000 | |
| Limiting speed for oil lubrication | nG Oil | 9,100 |
