Outside diameter | D | 35 | mm |
Width | B | 52 | mm |
Basic static load rating, radial | C0r | 18,600 | |
Speed on permanent grease lubrication | nD G | 6,500 | |
Permissible dynamic load outer ring, radial | Fr per | 8,500 |
Fit diameter of roller stud / stud | d1 | 16 | mm |
Basic dynamic load rating, radial | Cr | 15,600 | |
Fatigue load limit, radial | Cur | 2,480 | |
Permissible static load, radial | F0r per | 16,800 |
Maximum witdh of thrust washer | B1 | 22.60 | mm |
Width, outer ring | C | 18 | mm |
Minimum chamfer dimension | rmin | 0.60 | mm |
Thread | M16X1,5 | ||
Width of flats | W | 8 | mm |
Width, eccentric | Be | 12 | mm |
Bolt/stud length effectively | B2 | 29.50 | mm |
Protrusion outer ring to thrust washer | C1 | 3.80 | mm |
Stop diameter of thrust washer | d2 | 27.60 | mm |
Thread length | IG | 17 | mm |
Diameter of eccentric | de | 20 | mm |
Eccentricity | e | 1 | mm |