| Construction width | 53 mm | ||
| Valve function | 5/2- or 3/2-way monostable | ||
| Material seals | NBR | ||
| Pneumatic connection, port 4 | NAMUR port pattern | ||
| Pneumatic connection, port 2 | NAMUR port pattern | ||
| Pilot exhaust port 84 | M5 | ||
| Type of mounting | On manifold rail | ||
| Ambient temperature | -5 °C ... 40 °C | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Switching time on | 50 ms | ||
| C value | 4,2 l/sbar | ||
| lap | Underlap | ||
| Flow direction | Non-reversible | ||
| Manual override | Detenting Non-detenting | ||
| Mounting position | optional | ||
| Exhaust-air function | With flow control option | ||
| Explosion ambient temperature | -5°C <= Ta <= +40°C | ||
| Explosion ignition protection type for gas | Ex h IIC T6 Gb | ||
| ATEX category gas | II 2G | ||
| Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) | ||
| Type of reset | Mechanical spring | ||
| Operating pressure | 2 bar ... 10 bar | ||
| pneumatic working port | Sub-base |
| Type of actuation | Electric | ||
| Material housing | Die-cast aluminium | ||
| Pneumatic connection, port 5 | G1/4 | ||
| Pneumatic connection, port 3 | G1/4 | ||
| Pneumatic connection, port 1 | G1/4 | ||
| Breather connection | Internal | ||
| Product weight | 280 g | ||
| Media temperature | -5 °C ... 40 °C | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| Switching time off | 100 ms | ||
| b value | 0,33 | ||
| Symbol | 991,831 | ||
| Type of piloting | Pilot actuated | ||
| Conforms to standard | VDI/VDE 3845 (NAMUR) | ||
| Sealing principle | Soft | ||
| Nominal size | 7 mm | ||
| Explosion ignition protection type for dust | Ex h IIIC T70°C Db | ||
| ATEX category dust | II 2D | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Design | Poppet seat | ||
| Operating voltage | Via solenoid coil, must be ordered separately | ||
| Standard nominal flow rate | 900 l/min |
