| Tolerance for H | ± 0.2 | ||
| A | 2.90 | mm | |
| Size | 22 | ||
| D | 36 | mm | |
| D1 | 45 | mm |
| H | 29.50 | mm | |
| B | 5.70 | ||
| dw | 22.23 | mm | |
| Tolerance for D | ± 0.08 | ||
| H | 9.80 | mm |
| C | 1,300 | N | |
| vmax (In case of prolonged periods of use at speeds above 1 m/s, an increase in temperature and reduction in service life needs to be reckoned with depending on the load. ) | 2 | m/s | |
| Operating conditions | Operating conditions | ||
| Admissible operating temperature (min ... max) (At temperatures above 100 °C, only bright metal load balls without a felt seal should be used. Make allowance for reduction in load capacity. Use high-temperature lubricant! Follow the manufacturer’s instructions! The existing lubricant oil may have to be washed out. ) | -30 °C ... +100 °C |
| C0 | 2,500 | N | |
| m | 0.13 | kg | |
| Size | 22 |
