Specifications
Type (KU) | Ball Transfer Units with sheet steel housing, R0530 |
---|---|
Version (B) | Cover and housing galvanized, balls made from antifriction bearing steel |
Size (45) | 45 size |
Variants (BL) | Bottom hole |
---|---|
Seals (MFG) | With felt seal, lubricated |
Tolerance for H | ± 0.4 | ||
A | 4.20 | mm | |
Size | 45 | ||
D | 62 | mm | |
D1 | 75 | mm |
H | 53.70 | mm | |
B | 10.50 | ||
dw | 44.45 | mm | |
Tolerance for D | ± 0.095 | ||
H | 19 | mm |
C | 6,000 | N | |
vmax (In case of prolonged periods of use at speeds above 1 m/s, an increase in temperature and reduction in service life needs to be reckoned with depending on the load. ) | 2 | m/s | |
Operating conditions | Operating conditions | ||
Admissible operating temperature (min ... max) (At temperatures above 100 °C, only bright metal load balls without a felt seal should be used. Make allowance for reduction in load capacity. Use high-temperature lubricant! Follow the manufacturer’s instructions! The existing lubricant oil may have to be washed out. ) | -30 °C ... +100 °C |
C0 | 12,000 | N | |
m | 0.72 | kg | |
Size | 45 |