| Series | Compact | ||
| Max. acceleration amax | 150 m/s² | ||
| Length of linear bushing | 40 mm | ||
| Permissible ambient temperature | -10 °C ... +80 °C | ||
| Footnote friction coefficient μ | Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. | ||
| Footnote friction force FR | One wiper seal: Multiply by a factor of 0.5. | ||
| Footnote minimum dynamic load capacity Cmin | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. | ||
| Footnote minimum static load capacity C0min | The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
| Maximum dynamic load capacity Cmax | 2930 N | ||
| Maximum permissible linear speed vmax | 5 m/s | ||
| Outer diameter d | 35 mm | ||
| Friction coefficient μ | 0,001 ... 0,004 | ||
| Footnote breakaway force | One wiper seal: Multiply by a factor of 0.5. | ||
| Footnote maximum dynamic load capacity Cmax | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. | ||
| Breakaway force | 4.5 N | ||
| Footnote maximum static load capacity C0max | The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
