| L1 | 13 | mm | |
| S | 9 | ||
| B | 75 | ||
| D1 | 98 | mm | |
| L | 151 mm ±0.3 |
| L1 | 13 mm | ||
| V | 8.10 | mm | |
| D | 62 mm -0.022 | ||
| D2 | 80 | mm |
| amax | 100 | m/s² | |
| m | 1.60 | kg | |
| Breakaway force | 24 | N | |
| Working bore diameter tolerance | + 16 - 4 |
||
| Operating conditions | Operating conditions |
| vmax | 2.50 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 8 | N | |
| Rows of balls | 6 | ||
| Shaft radial clearance h6 (Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7. ) | + 27 + 1 |
||
| Permissible ambient temperature (min ... max) (Only unsealed Linear Bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. ) | -10 °C ... +80 °C |
