| D | 24 | mm | |
| E1 | 34 mm ±0.15 | ||
| H | 19 | mm | |
| H1 | 38 | mm | |
| L | 65 | mm | |
| N2 | 11 | mm | |
| S1 | M5 |
| A | 45 | mm | |
| E2 | 40 mm ±0.15 | ||
| Tolerance for H (In relation to Ø d.) | + 24 0 |
||
| H4 | 13 | mm | |
| N1 | 18 | mm | |
| S (Fixing screws ISO 4762-8.8) | 4.30 |
| amax | 150 | m/s² | |
| m | 0.24 | kg | |
| Breakaway force | 2 | N | |
| Operating conditions | Operating conditions |
| vmax | 5 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 1 | N | |
| Shaft radial clearance h6 | + 8 - 24 |
||
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
