| A | 69 | mm | |
| e | 58 mm ±0.25 | ||
| H1 | 50 | mm | |
| L1 | 30 | mm | |
| S | 5.50 |
| B | 23 | ||
| H (In relation to nominal shaft dimension "d") | 25 mm ±0.08 | ||
| L | 38 | mm | |
| L1 | 30 mm | ||
| V | 10.50 | mm |
| amax | 150 | m/s² | |
| m | 0.08 | kg | |
| Breakaway force (Frictional drags generated by Linear Bushings with seals on both ends when not under radial load. This depends on speed and lubrication. ) | 5 | N | |
| Operating conditions | Operating conditions |
| vmax | 3 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 2.50 | N | |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
