Specifications
Type (LS) | Linear sets Adjustable Normal or stainless, R1060 |
---|---|
Series (K) | Plastic (with segmental linear bushing) |
Form | Closed |
Shaft diameter (30) | 30 Shaft diameter |
---|---|
Seals (DD) | With two seals |
L1 | 44 | mm | |
S | 6.60 | ||
A | 97 | mm | |
e | 80 mm ±0.3 | ||
H1 | 70 | mm |
L1 | 44 mm | ||
V | 13 | mm | |
B | 36 | ||
H (In relation to nominal shaft dimension "d") | 35 mm ±0.1 | ||
L | 55 | mm |
amax | 150 | m/s² | |
m | 0.28 | kg | |
Breakaway force (Frictional drags generated by Linear Bushings with seals on both ends when not under radial load. This depends on speed and lubrication. ) | 9 | N | |
Operating conditions | Operating conditions |
vmax | 3 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 4 | N | |
Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |