| A | 124 | mm | |
| L1 | 56 mm | ||
| V | 17 | mm | |
| e | 103 mm ±0.3 | ||
| H1 | 90 | mm |
| L1 | 56 | mm | |
| S | 8.60 | ||
| B | 48 | ||
| H (In relation to nominal shaft dimension "d") | 45 mm ±0.1 | ||
| L | 67 | mm |
| Operating conditions | Operating conditions | ||
| amax | 150 | m/s² | |
| m | 0.47 | kg | |
| Breakaway force (Frictional drags generated by Linear Bushings with seals on both ends when not under radial load. This depends on speed and lubrication. ) | 12 | N |
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C | ||
| vmax | 3 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 5 | N | |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance |
