| L | 45 | mm | |
| V (Tolerance ISO 8062-3 - DCTG 9.) | 8 | mm | |
| D | 32 | mm | |
| A (Tolerance ISO 8062-3 - DCTG 9.) | 60 | mm | |
| B1 | 28 | mm | |
| E2 | 32 mm ±0.15 | ||
| Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 5 - 19 |
| S | 4.50 | ||
| W (Minimum size in relation to Ø d.) | 10 | mm | |
| A | 60 | mm | |
| B (Tolerance ISO 8062-3 - DCTG 9.) | 42 | ||
| E1 | 45 mm ±0.15 | ||
| H | 25 | mm | |
| H2 (Tolerance ISO 8062-3 - DCTG 9.) | 42 | mm |
| amax | 100 | m/s² | |
| m | 0.39 | kg | |
| Breakaway force | 16 | N | |
| Operating conditions | Operating conditions |
| vmax | 2.50 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 6 | N | |
| Shaft radial clearance h6 | + 36 + 4 |
||
| Permissible ambient temperature (min ... max) (for standard Linear Bushings without wiper seals) | -10 °C ... +100 °C |
