| V (Tolerance ISO 8062-3 - DCTG 9.) | 22 | mm | |
| L | 165 | mm | |
| W (Minimum size in relation to Ø d.) | 36.30 | mm | |
| A | 54 | mm | |
| B (Tolerance ISO 8062-3 - DCTG 9.) | 122 | ||
| E1 | 170 mm ±0.5 | ||
| H | 80 | mm |
| H2 (Tolerance ISO 8062-3 - DCTG 9.) | 140 | mm | |
| S | 13.50 | ||
| D | 120 | mm | |
| A (Tolerance ISO 8062-3 - DCTG 9.) | 200 | mm | |
| B1 | 125 | mm | |
| E2 | 90 mm ±0.25 | ||
| Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 7 - 28 |
| amax | 50 | m/s² | |
| m | 13.15 | kg | |
| Breakaway force | 60 | N | |
| Operating conditions | Operating conditions |
| vmax | 2 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 20 | N | |
| Shaft radial clearance h6 | + 54 + 6 |
||
| Permissible ambient temperature (min ... max) (for standard Linear Bushings without wiper seals) | -10 °C ... +100 °C |
