a)
Center lubricating hole
b)
Lubricating hole M8 x 1 sealed with plastic cap
| S | 13.50 | ||
| V | 20 | mm | |
| D | 75 | mm | |
| E1 | 90 mm ±0.5 | ||
| H | 60 | mm | |
| H1 | 94 | mm | |
| L | 160 | mm | |
| O (ISO 4762–8.8 cylinder head bolts, recommendation applies for bolting in steel or cast iron threads. ) | M12x40 |
| SW | 6 | ||
| W (Minimum size in relation to shaft diameter d.) | 19.50 | mm | |
| A | 170 | mm | |
| E2 | 135 mm ±0.5 | ||
| Tolerance for H (Clamped (fastened) based on nominal shaft dimension d.) | + 17 - 4 |
||
| H2 | 22.50 | mm | |
| L1 | 109 mm +0.5 |
| amax | 50 | m/s² | |
| m | 11.80 | kg | |
| Breakaway force | 32 | N | |
| Operating conditions | Operating conditions |
| vmax | 2 | m/s | |
| FR | 11 | N | |
| Radial clearance | Comes with an h5 shaft (lower limit) and set to zero clearance | ||
| Permissible ambient temperature (min ... max) (100 °C for a short period) | -20 °C ... +80 °C |
