a)
Center lubricating hole
b)
Lubricating hole M8 x 1 sealed with plastic cap
| D | 145 | mm | |
| E1 | 170 mm ±0.5 | ||
| H | 110 | mm | |
| H1 | 175 | mm | |
| L | 310 | mm | |
| O (ISO 4762–8.8 cylinder head bolts, recommendation applies for bolting in steel or cast iron threads. ) | M24x80 | ||
| SW | 12 | ||
| W (Minimum size in relation to shaft diameter d.) | 39 | mm |
| A | 310 | mm | |
| E2 | 260 mm ±0.5 | ||
| Tolerance for H (Clamped (fastened) based on nominal shaft dimension d.) | + 22 - 5 |
||
| H2 | 37.50 | mm | |
| L1 | 213 mm +0.5 | ||
| S | 26 | ||
| V | 35 | mm |
| amax | 50 | m/s² | |
| m | 76.10 | kg | |
| Breakaway force | 60 | N | |
| Operating conditions | Operating conditions |
| vmax | 2 | m/s | |
| FR | 20 | N | |
| Radial clearance | Comes with an h5 shaft (lower limit) and set to zero clearance | ||
| Permissible ambient temperature (min ... max) (100 °C for a short period) | -20 °C ... +80 °C |
