| D | 32 | mm | |
| E1 | 39 | mm | |
| H | 25 | mm | |
| H1 | 50 | mm | |
| N | 12 | mm | |
| S1 | M8 |
| B | 60 | ||
| E2 | 44 | mm | |
| Tolerance for H (Two or more Linear Sets on one shaft are machined to the same dimension H while installed. Dimension H is reduced by 0.5 mm. ) | + 13 - 22 |
||
| L | 55 | mm | |
| S (Fixing screws ISO 4762-8.8) | 6.60 |
| amax | 150 | m/s² | |
| m | 1 | kg | |
| Operating conditions | Operating conditions |
| vmax | 3 | m/s | |
| m (shaft) | 2.45 | kg/m | |
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
