Specifications
Lubrication | No initial lubrication |
---|
Weight | 150g |
---|
a)
Lubricating hole sealed with plastic cap
M6 when d ≤ 20
M8x1 when d ≥ 25
D | 22 | mm | |
E1 | 28 | mm | |
H | 18 | mm | |
H1 | 35 | mm | |
L | 40 | mm | |
S (Fixing screws ISO 4762-8.8) | 5.30 |
B | 42 | ||
E2 | 30 | mm | |
Tolerance for H (Two or more Linear Sets on one shaft are machined to the same dimension H while installed. Dimension H is reduced by 0.5 mm. ) | + 13 - 22 |
||
H2 | 8.50 | mm | |
N | 12 | mm | |
S1 | M6 |
amax | 150 | m/s² | |
m | 0.15 | kg | |
Operating conditions | Operating conditions |
vmax | 3 | m/s | |
m (shaft) | 0.89 | kg/m | |
Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |