a)
Lubricating hole M8x1 sealed with plastic cap
b)
Radial clearance adjustable
c)
Shaft with shaft support rail, R1012
| S2 (Predrilled hole for pinned fitting.) | 9.70 | ||
| V2 | 6 | mm | |
| A | 125 | mm | |
| A2 | 85 | mm | |
| E2 | 50 | mm | |
| H1 | 66 | mm | |
| L | 100 | mm | |
| N2 | 18 | mm | |
| S | 14 |
| SW | 6 | ||
| W (Minimum size in relation to shaft diameter d.) | 19.50 | mm | |
| A1 | 62.5 mm ±0.008 | ||
| E1 | 94 | mm | |
| H (Clamped (fastened) based on nominal shaft dimension d.) | 40 mm ±0.008 | ||
| H2 | 80 | mm | |
| N1 | 27 | mm | |
| N3 | 11 | mm | |
| S1 | M16 |
| amax | 50 | m/s² | |
| m | 3.50 | kg | |
| Breakaway force | 32 | N | |
| Radial clearance | Comes with an h5 shaft (lower limit) and set to zero clearance | ||
| Permissible ambient temperature (min ... max) | -20 °C ... +100 °C |
| vmax | 2 | m/s | |
| FR | 16 | N | |
| m (Friction coefficients of unsealed radial Linear Bushings when lubricated with oil.) | 0,001 ... 0,002 | ||
| Operating conditions | Operating conditions |
