a)
Lubricating hole M8x1 sealed with plastic cap
b)
Radial clearance adjustable
c)
Shaft with shaft support rail, R1012
| S2 (Predrilled hole for pinned fitting.) | 15.70 | ||
| V2 | 16 | mm | |
| A | 260 | mm | |
| A2 | 170 | mm | |
| E2 | 100 | mm | |
| H1 | 130 | mm | |
| L | 200 | mm | |
| N2 | 36 | mm | |
| S | 26 |
| SW | 12 | ||
| W (Minimum size in relation to shaft diameter d.) | 39 | mm | |
| A1 | 130 mm ±0.008 | ||
| E1 | 205 | mm | |
| H (Clamped (fastened) based on nominal shaft dimension d.) | 80 mm ±0.008 | ||
| H2 | 160 | mm | |
| N1 | 57 | mm | |
| N3 | 15 | mm | |
| S1 | M30 |
| amax | 50 | m/s² | |
| m | 29.60 | kg | |
| Breakaway force | 60 | N | |
| Radial clearance | Comes with an h5 shaft (lower limit) and set to zero clearance | ||
| Permissible ambient temperature (min ... max) | -20 °C ... +100 °C |
| vmax | 2 | m/s | |
| FR | 30 | N | |
| m (Friction coefficients of unsealed radial Linear Bushings when lubricated with oil.) | 0,001 ... 0,002 | ||
| Operating conditions | Operating conditions |
