a)
Air connection*) G1 on two sides for release pressure
b)
Connection*) G2 on two sides for air-plus port or air filter
c)
Adjusting screw on two sides
d)
Spacer plate (accessory)
e)
Exhaust on two sides
f)
Air filter: Connection G2 (possible on two sides)
g)
At least two middle mounting holes must be used!
*) Only one connection needed.
All connections sealed upon delivery.
| A | 120 | mm | |
| B3max | 220.10 | mm | |
| E2 | 80 | mm | |
| E6 | - | ||
| F1 | 12 | mm | |
| F3 | 167 | mm | |
| G1 | G1/8" | ||
| H | 60 | mm | |
| N3 | - | ||
| S2 | M12 | ||
| SW | Ø15, SW13 |
| B1 | 197 | mm | |
| E1 | 100 | mm | |
| E3 | 30 | mm | |
| E7 | 98.50 | mm | |
| F2 | 32 | mm | |
| F4 | 106.50 | mm | |
| G2 | G1/8" | ||
| H1 (Ball Runner Block .H. (...high...) Spacer plate necessary. Available on request.) | 52 | mm | |
| N4 | 12 | mm | |
| S3 | - | ||
| X | 6.50 | mm |
| Spring energy holding force with standard air port (Holding force by spring energy. The inspection is done in a mounted state with a lubricated layer (ISO-VG 68). ) | 5,200 | N | |
| Air consumption (normal liter) standard air port | 0.15 | dm³/stroke | |
| Max. pneumatic operating pressure | 8 | bar | |
| Mass | 6.20 | kg | |
| Size | 45 |
| Spring energy holding force with air-plus port (Increased holding force by additional air admission at air-plus port with 6.0 bar. Circuit across 5/2- or 5/3-way directional control valve. ) | 7,600 | N | |
| Air consumption (normal liter) air-plus port | 0.48 | dm³/stroke | |
| Release pressure min. | 5.50 | bar | |
| Operating conditions | Operating conditions | ||
| Permissible ambient temperature (min ... max) | 0 °C ... +70 °C |
