REXROTH R165111122 ball runner block carbon steel

KWD-015-FNS-C1-S-1

$149.09 Limited stock only available on quotation

Specifications

  • Area of application: For high rigidity requirements
  • Attachments on the Ball Runner Block can be mounted from above and below
  • Significantly reduced frictional oscillations and low friction level, particularly under external load
  • Maximum precision
  • Patented entry zone increases the travel accuracy up to a factor of six

Ball runner block CS, made of Carbon steel

Series (R1651) Flange, normal, standard height R1651...2
Size (1) 15 size
Preload class (1) C1 Moderate preload
Accuracy class (1) SP Super Precision Accuracy Level
Seals (22) SS Standard seal with ball chain

a) For O-ring
Size 15: Ø 4 · 1.0 (mm)
Size 20 - 45: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
b) Recommended position for pin holes (dimension E4 see general technical notes and information in the "Installation" section)
Rough-drilled holes may be present here from manufacturing. These may be bored open.
c) Lube nipple, size 15 - 20:
Funnel-type lube nipple DIN 3405-A M3x5, B2 = 1.6 mm
When using different lube nipples, pay attention to the screw-in depth of 5 mm!
Lube nipple, size 25 - 45:
Hydraulic-type lube nipple DIN 71412-A M6x8, B2 = 9.5 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection possible on all sides.
d) Sealing plugs may be present here from manufacturing. Remove before mounting.

S2 M5
S9 M2.5x3.5
V1 5 mm
A1 23.50 mm
A3 16 mm
B1 39.20 mm
E2 30 mm
E8 24.55 mm
H 24 mm
Dimension H2 with cover strip 16.30 mm
K1 8 mm
K3 3.20 mm
N1 5.20 mm
N6 10.3 mm ±0.5
ØS5 4.50 mm
T 60 mm
A 47 mm
A2 15 mm
B 58.2 mm +0.5
E1 38 mm
E3 26 mm
E9 6.70 mm
H1 19.90 mm
Dimension H2 without cover strip 16.20 mm
K2 9.60 mm
K4 3.20 mm
N2 4.40 mm
S1 4.30 mm
amax (If Fcomb > 2.8 • Fpr : amax = 50 m/s2) 500 m/s²
m 0.20 kg
Operating conditions Operating conditions
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. ) ​0 °C ... +80 °C
vmax 5 m/s
m (Without friction of seal) 0,002 ... 0,003
Size 15
$149.09
Stock Ask for quotation
Part number R165111122
Manufacturer REXROTH
Quantity Unit Price
1+ $149.09

  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies