R165141122 Bosch Rexroth

REXROTH R165141122 ball runner block carbon steel

Name: R165141122 REXROTH
Brand: REXROTH
SKU: 110780-en-usd
Price: 298.64 USD
Availability: SoldOut

KWD-045-FNS-C1-S-1

$298.64 Limited stock only available on quotation

Specifications

Area of application: For high rigidity requirements
Attachments on the Ball Runner Block can be mounted from above and below
Significantly reduced frictional oscillations and low friction level, particularly under external load
Maximum precision
Patented entry zone increases the travel accuracy up to a factor of six

Ball runner block CS, made of Carbon steel

Series (R1651)	Flange, normal, standard height R1651...2
Size (4)	45 size
Preload class (1)	C1 Moderate preload

Accuracy class (1)	SP Super Precision Accuracy Level
Seals (22)	SS Standard seal with ball chain

Dimensions
Technical data

^a) For O-ring
Size 15: Ø 4 · 1.0 (mm)
Size 20 - 45: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
^b) Recommended position for pin holes (dimension E₄ see general technical notes and information in the "Installation" section)
Rough-drilled holes may be present here from manufacturing. These may be bored open.
^c) Lube nipple, size 15 - 20:
Funnel-type lube nipple DIN 3405-A M3x5, B₂ = 1.6 mm
When using different lube nipples, pay attention to the screw-in depth of 5 mm!
Lube nipple, size 25 - 45:
Hydraulic-type lube nipple DIN 71412-A M6x8, B₂ = 9.5 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection possible on all sides.
^d) Sealing plugs may be present here from manufacturing. Remove before mounting.

S₂	M12
S₉	M4x7
V₁	10	mm
A₁	60	mm
A₃	37.50	mm
B₁	97	mm
E₂	80	mm
E₈	69.80	mm
H	60	mm
Dimension H₂ with cover strip	40.15	mm
K₁	17.30	mm
K₃	8.20	mm
N₁	15	mm
N₆	23.5 mm ±0.5

ØS₅	14	mm
T	105	mm
A	120	mm
A₂	45	mm
B	137.6 mm +0.5
E₁	100	mm
E₃	60	mm
E₉	20.90	mm
H₁	50.30	mm
Dimension H₂ without cover strip	39.85	mm
K₂	19.30	mm
K₄	8.20	mm
N₂	12.40	mm
S₁	10.40	mm

a_max (If F_comb > 2.8 • F_pr : a_max = 50 m/s²)	500	m/s²
m	3	kg
Operating conditions	Operating conditions
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. )	0 °C ... +80 °C