R165151110 Bosch Rexroth

REXROTH R165151110 ball runner block carbon steel

Name: R165151110 REXROTH
Brand: REXROTH
SKU: 110805-en-usd
Price: 391.63 USD
Availability: InStock

KWC-055-FNS-C1-S-2

$391.63 4 pcs. with 1 to 3 days delivery to United States

Specifications

Area of application: For maximum speeds
Improved rigidity under lift-off and side loading conditions due to two additional mounting screw holes at the center of the Ball Runner Block
Maximum system rigidity due to pre-tensioned O-arrangement
Electrically insulating due to use of ceramic balls
Attachments on the Ball Runner Block can be mounted from above and below

Ball runner block CS, made of Carbon steel

Series (R1651)	Flange, normal, standard height R1651...1
Size (5)	55 size
Preload class (1)	C1 Moderate preload

Accuracy class (1)	SP Super Precision Accuracy Level
Seals (10)	SS Standard seal without ball chain

Dimensions
Technical data

^a) Recommended position for pin holes (dimension E₄ see general technical notes and information in the "Installation" section).
Rough-drilled holes may be present here from manufacturing. These may be bored open.
^b) Lube nipple, size 55:
Hydraulic-type lube nipple DIN 71412-B M6x8, B₂ = 16 mm
Lube nipple, size 65:
Hydraulic-type lube nipple DIN 71412-B M8x1x8, B₂ = 16 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection is possible on end-face.
^c) Sealing plugs may be present here from manufacturing. Remove these prior to mounting.
^d) Size 65

S₂	M14
S₉	M5x8
V₁	12	mm
A₁	70	mm
A₃	43.50	mm
B₁	115.50	mm
E₂	95	mm
E₈	80	mm
E₉	22.30	mm
H	70	mm
Dimension H₂ with cover strip	48.15	mm
K₃	9	mm
N₂	13.50	mm
S₁	12.40	mm

ØS₅	16	mm
T	120	mm
A	140	mm
A₂	53	mm
B	159 mm +0.5
E₁	116	mm
E₃	70	mm
E_8.1	-
E_9.1	-
H₁	57	mm
Dimension H₂ without cover strip	47.85	mm
N₁	18	mm
N₆	29 mm ±0.5

a_max (If F_comb > 2.8 • F_pr : a_max = 50 m/s²)	250	m/s²
m	5.20	kg
Operating conditions	Operating conditions
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. )	-10 °C ... +80 °C