R165163210 Bosch Rexroth

REXROTH R165163210 ball runner block carbon steel

Name: R165163210 REXROTH
Brand: REXROTH
SKU: 110823-en-usd
Price: 1020.77 USD
Availability: SoldOut

KWC-065-FNS-C3-P-2

$1,020.77 Limited stock only available on quotation

Specifications

Area of application: For maximum speeds
Improved rigidity under lift-off and side loading conditions due to two additional mounting screw holes at the center of the Ball Runner Block
Maximum system rigidity due to pre-tensioned O-arrangement
Electrically insulating due to use of ceramic balls
Attachments on the Ball Runner Block can be mounted from above and below

Ball runner block CS, made of Carbon steel

Series (R1651)	Flange, normal, standard height R1651...1
Size (6)	65 size
Preload class (3)	C3 High preload

Accuracy class (2)	P Precision Accuracy Level
Seals (10)	SS Standard seal without ball chain

Dimensions
Technical data

^a) Recommended position for pin holes (dimension E₄ see general technical notes and information in the "Installation" section).
Rough-drilled holes may be present here from manufacturing. These may be bored open.
^b) Lube nipple, size 55:
Hydraulic-type lube nipple DIN 71412-B M6x8, B₂ = 16 mm
Lube nipple, size 65:
Hydraulic-type lube nipple DIN 71412-B M8x1x8, B₂ = 16 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection is possible on end-face.
^c) Sealing plugs may be present here from manufacturing. Remove these prior to mounting.
^d) Size 65

S₁	14.60	mm
ØS₅	18	mm
T	150	mm
A	170	mm
A₂	63	mm
B	188 mm +0.5
E₁	142	mm
E₃	82	mm
E_8.1	100	mm
E_9.1	53.50	mm
H₁	76	mm
Dimension H₂ without cover strip	59.85	mm
N₁	23	mm
N₆	38.5 mm ±0.5

S₂	M16
S₉	M4x7
V₁	15	mm
A₁	85	mm
A₃	53.50	mm
B₁	139.60	mm
E₂	110	mm
E₈	76	mm
E₉	11	mm
H	90	mm
Dimension H₂ with cover strip	60.15	mm
K₃	16	mm
N₂	14	mm

a_max (If F_comb > 2.8 • F_pr : a_max = 50 m/s²)	250	m/s²
m	10.25	kg
Operating conditions	Operating conditions
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. )	-10 °C ... +80 °C