Specifications
Type (LSAH) | Linear sets Closed, R1701 |
---|---|
Series (H) | Super h |
Shaft diameter (20) | 20 Shaft diameter |
---|---|
Seals (DD) | With two seals |
a)
Lubricating hole sealed with plastic cap
M8x1 (Ø d 20 – 50 mm)
M10x1 (Ø d = 60 mm)
S2 | 5 | ||
V | 5 | mm | |
A | 60 | mm | |
E2 | 32 mm ±0.15 | ||
E4 | 15 | mm | |
Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 8 - 16 |
||
H4 | 16 | mm | |
m | 30 mm ±0.01 | ||
N2 | 18 | mm | |
S1 | M8 |
SW | 4 | ||
D | 32 | mm | |
E1 | 45 mm ±0.15 | ||
E3 | 50 | mm | |
H | 25 | mm | |
H1 | 50 | mm | |
L | 46 | mm | |
N1 | 24 | mm | |
S | 6.60 |
amax | 150 | m/s² | |
m | 0.29 | kg | |
Breakaway force | 5 | N | |
Operating conditions | Operating conditions |
vmax | 5 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 2.50 | N | |
Shaft radial clearance h6 (Clamped (fastened).) | + 43 + 11 |
||
Permissible ambient temperature (min ... max) | -20 °C ... +80 °C |