Specifications
Type (LSAHO) | Linear sets Open, R1703 |
---|---|
Series (SH) | Super H |
Shaft diameter (30) | 30 Shaft diameter |
---|---|
Seals (VD) | Fully sealed |
a)
Lubricating hole sealed with plastic cap
S1 | M10 | ||
A | 60 | mm | |
E1 | 68 mm ±0.15 | ||
E3 | 72 | mm | |
H | 35 | mm | |
H1 | 60 | mm | |
H4 | 6 | mm | |
l3 | 26 | ||
N1 | 34 | mm | |
S | 8.40 | ||
V | 8 | mm | |
S2 | 6 |
D | 47 | mm | |
A | 87 | mm | |
E2 | 45 mm ±0.15 | ||
E4 | 20 | mm | |
Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 8 - 16 |
||
H3 | 11.50 | mm | |
L | 69 | mm | |
m (Clamped (fastened) in relation to Ø d.) | 43.5 mm ±0.01 | ||
N2 | 22 | mm | |
SW | 3 | ||
W | 12.80 | mm |
amax | 150 | m/s² | |
m | 0.79 | kg | |
Breakaway force | 13.50 | N | |
Operating conditions | Operating conditions |
vmax | 5 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 6 | N | |
Shaft radial clearance h6 (Clamped (fastened).) | + 31 - 2 |
||
Permissible ambient temperature (min ... max) | -20 °C ... +80 °C |